Plastalloy Physical Properties

Aging

Compressive Yield Strength after 7 days at 200 F, (psi 4870)
Moldulus of Elasticity in Compression after 7 days at 200 F, psi 46500
Modulus of Elasticity in Tension 600 hr. Salt Spray, psi 50000
Ultimate Tensile Strength after 600 hr. Salt Spray, psi 800
Ultimate Tensile Strength after 1000 hr. (Weather-O-Meter), psi 750
Ultimate Elongation after 1000 hr. (Weather-O-Meter), % 4.6
Ultimate Elongation after 600 hr. Salt Spray, % 8.2
Modulus of Elasticity in Tension after 1000 hr. (Weather-O-Meter), psi 166000

Mechanical

Durometer Hardness Shore D 35-60
Izod Impact Strength, ft-lb/in. of Notch 1.6
Ultimate Tensile Strength, psi 600
Elongation at Break, % 3
Modulus of Elasticity in Tensionn, psi 67000
Ultimate Shear Strength, psi 1620
Compression Yield Strength 3700
Modulus of Elasticity in Compression, psi 30100

Electrical

Volume Resistivity (X1010) ohm-cm 3.5
Insulation Resistance (X106) ohm 6.95
Arc Resistance, sec. 100

Thermal

Heat Distortian Temp., 264 psi., F 115
Heat Distortian Temp., 66psi., F 170
Thermal Conductivity Btu / hr. / F / in. 4.3
Coefficient of Cubical Thermal Expansion X10-5 per F 5.2
Maximum Operating Temp., F 300
Coefficient of Linear Thermal Expansion X10-5 per F 2.59